UCN2 Pro Dubbel Lader voor Canon LP E6 (N)

Ladegeräte Nitecore UCN2 Pro Dual USB Charger for Canon LP E6(N) The Nitecore UCN2 Pro Dual USB Charger is specially designed for simultaneously charging two Canon LP E6N li ion batteries. With a maximum output current of 1200mA per battery slot, two batteries are fully charged in just 3.5 hours. Various charging modes The UCN2 Pro has two charging modes, QC mode and standard mode. When you use the UCN2 Pro with a QC 2.0 adapter the display shows 'Quick Charge'. In this mode the charger has an output voltage of 9 Volt and charges two batteries simultaneously with an output current of 800mA, or one battery with a maximum output current of 1200mA. In standard mode the output voltage is 5 Volts and charges the first battery inserted with a maximum output current of 1000mA, and then the second battery when the first battery is fully charged. The charger operates at 5VDC, making it compatible with USB adapters, power banks and solar panels.  Intelligent LCD display The advanced UCN2 Pro has a smart charge management system that monitors battery status and displays voltage, charge current, temperature, capacity and level on the LCD display. The charger automatically selects the most suitable charging mode based on this data. The device also offers battery condition monitoring, performing a health inspection and reporting the cell status as good, normal or bad on the LCD display.  , Simultaneous charging of two Canon LP E6N li ion batteries Input voltage of 5VDC or 9VDC Maximum output current of 1.2A per battery slot QC 2.0 compatible with suitable adapters Reverse polarity protection Short circuit protection Battery condition monitoring Activation of deeply discharged cells Smart Charging Management System LCD displays, mAh, voltage and battery status 1 year warranty , Nitecore UCN2 Pro USB cable User manual